README for XFree86[TM] 3.3 : Supported video-card chip-sets ---------------------------------------------------------------------------- Supported video-card chip-sets At this time, XFree86 3.3 supports the following chipsets: Ark Logic ARK1000PV, ARK1000VL, ARK2000PV, ARK2000MT Alliance AP6422, AT24 ATI 18800, 18800-1, 28800-2, 28800-4, 28800-5, 28800-6, 68800-3, 68800-6, 68800AX, 68800LX, 88800GX-C, 88800GX-D, 88800GX-E, 88800GX-F, 88800CX, 264CT, 264ET, 264VT, 264VT2, 264GT (this list includes the Mach8, Mach32, Mach64, 3D Rage and 3D Rage II) Avance Logic ALG2101, ALG2228, ALG2301, ALG2302, ALG2308, ALG2401 Chips & Technologies 65520, 65530, 65540, 65545, 65520, 65530, 65540, 65545, 65546, 65548, 65550, 65554 Cirrus Logic CLGD5420, CLGD5422, CLGD5424, CLGD5426, CLGD5428, CLGD5429, CLGD5430, CLGD5434, CLGD5436, CLGD5440, CLGD5446, CLGD5462, CLGD5464, CLGD5465, CLGD5480, CLGD6205, CLGD6215, CLGD6225, CLGD6235, CLGD6410, CLGD6412, CLGD6420, CLGD6440, CLGD7541, CLGD7543, CLGD7548, CLGD7555 Digital Equipment Corporation TGA Compaq AVGA Genoa GVGA IBM 8514/A (and true clones), XGA-2 IIT AGX-014, AGX-015, AGX-016 Matrox MGA2064W (Millennium), MGA1064SG (Mystique) MX MX68000, MX680010 NCR 77C22, 77C22E, 77C22E+ Number Nine I128 (series I and II) NVidia/SGS Thomson NV1, STG2000 OAK OTI067, OTI077, OTI087 RealTek RTG3106 S3 86C911, 86C924, 86C801, 86C805, 86C805i, 86C928, 86C864, 86C964, 86C732, 86C764, 86C765, 86C775, 86C868, 86C968, 86C325, 86C375, 86C385, 86C988, 86CM65 SiS 86C201, 86C202, 86C205 Tseng ET3000, ET4000AX, ET4000/W32, ET4000/W32i, ET4000/W32p, ET6000 Trident TVGA8800CS, TVGA8900B, TVGA8900C, TVGA8900CL, TVGA9000, TVGA9000i, TVGA9100B, TVGA9200CXR, TVGA9320, TVGA9400CXi, TVGA9420, TGUI9420DGi, TGUI9430DGi, TGUI9440AGi, TGUI9660XGi, TGUI9680, ProVidia 9682, ProVidia 9685, ProVidia 9692, Cyber 9382, Cyber 9385 Video 7/Headland Technologies HT216-32 Weitek P9000 Western Digital/Paradise PVGA1 Western Digital WD90C00, WD90C10, WD90C11, WD90C24, WD90C24A, WD90C30, WD90C31, WD90C33 All of the above are supported in both 256 color, and some are supported in mono and 16 color modes, and some are supported an higher color depths. Refer to the chipset-specific README files (currently for TGA, Matrox, Mach32, Mach64, NVidia, Oak, P9000, S3 (except ViRGE), S3 ViRGE, SiS, Video7, Western Digital, Tseng (W32), Tseng (all), AGX/XGA, ARK, ATI (SVGA server), Chips and Technologies, Cirrus, Trident) for more information about using those chipsets. The monochrome server also supports generic VGA cards, using 64k of video memory in a single bank, the Hercules monochrome card, the Hyundai HGC1280, Sigma LaserView, Visa and Apollo monochrome cards. The VGA16 server supports memory banking with the ET4000, Trident, ATI, NCR, OAK and Cirrus 6420 chipsets allowing virtual display sizes up to about 1600x1200 (with 1MB of video memory). For other chipsets the display size is limited to approximately 800x600. Note: The Diamond SpeedStar 24 (and possibly some SpeedStar+) boards are NOT supported, even though they use the ET4000. The Weitek 9100 and 9130 chipsets are not supported (these are used on the Diamond Viper Pro and Viper SE boards). The chips used on the FireGL boards are not currently supported. Most other Diamond boards will work with this release of XFree86. Diamond is actively supporting The XFree86 Project, Inc. ---------------------------------------------------------------------------- README for XFree86[TM] 3.3 : Supported video-card chip-sets